|
Of what do modern windows?
Any ten years ago the answer to this question was obvious to all.
Certainly, from a tree, from what? The modern window still consists of
frames, glasses, accessories. On the other hand, it is absolutely new
design to which the highest demands are made.
First, it should be closed, possess tightly low heat conductivity and a
high thermal protection.
Secondly, to be reliable, durable and easy-to-work.
Thirdly, to answer ours of representation about the fine.
Having broken a head, physics, chemists, designers and other scientific
brotherhood have decided: it is better to replace unary glass with "sandwich"
from two-three glasses (double-glazed window). And for manufacturing of
frames depending on a consumer wish to choose plastic, a tree, aluminium
or combinations from these materials. It is easy to tell, choose. It is
bad, when the assortment of chosen production is poor, but when a choice
of materials for repair of windows too big, our tortures at all it is
less.
Than occurrence of windows with plastic frames is caused? Really the
tree is worse?
Wooden windows - century tradition to which we have got used. They give
live heat to an interior of the house and create a cosiness. Wooden
windows are well combined with furniture, dvermi, a parquet, bear in
itself classical refinement and modern functionality, therefore is
frequent at repair choose wooden windows. Special processing reliably
protects wood, does its durable. Wooden windows have excellent
indicators on durability, to isolation and well resist to time
influence.k to a regret, natural materials in a century of polymers all
become more expensive, therefore meeting modern to requirements of a
window from a tree remain not cheap production and repair of windows
manages in a round sum. Windows from PVC rather have appeared recently
in Russia, however already had time to take strong positions owing to
variety of advantages. Plastic windows are tight, thanks to what possess
fine heat-shielding and soundproofing properties. Windows do not demand
painting and repair while in service.
Thanks to unique plasticity of PVC-PROFILE is capable to accept almost
any configurations that gives unlimited freedom to architects and
releases consumers from long terms of manufacturing of orders that is
characteristic for difficult works on a tree.
To what of modern materials - plastic or aluminium - approaches for
manufacturing of windows for premises more?
Through windows from our premises disappears much more heat, than
through external walls, a roof and a floor. Therefore their choice has
huge value for those who wishes to be protected from a cold reliably.
The usual aluminium profile practically does not hold heat. The combined
profile is more practical: outside aluminium, from the inside - a tree
or plastic. Besides, at manufacturing of windows and doors from an
aluminium profile systems "warm" * profiles are used. But such windows
are expensive enough. Optimum for inhabited apartment - windows from PVC
- profiles. Plastic provides a good heat-shielding and sound insulation
and repair of windows inexpensive.
Aluminium profile - the best decision for osteklenija the big areas,
loggias or balconies, manufacturing of such difficult designs, as winter
gardens.
Experts of our engineering centre in cooperation with factory design
department can develop the project of any complexity, from a winter
garden to a facade of the unusual geometrical form.
*) In "warm" profiles external and internal covers of a profile are
connected among themselves by the thermobridge (an isolating lath which
interrupts heat stream, providing, thus, the best теплоизoляцию).
Repair of windows: what profile to choose?
Operational characteristics of a ready design in many respects depend on
quality of a profile, therefore it is necessary to be in earnest about
its choice. It is necessary to pay attention on mnogokamernost of a
profile, a thickness of its walls, appearance aesthetics, to a
continuity of sealants on perimetre of a frame and shutters, a
configuration of the metal amplifier in a profile.VH - the profile
arrives on our market basically from Germany, Italy, Poland, France,
Turkey. Not all foreign production corresponds to the Russian climate,
has long term of operation. According to the experts, (including a
profile) Russia receives the basic volume of accessories from Germany.
This country has the developed chemical industry, it has begun
manufacturing of plastic windows. Traditionally it is considered that
PVC - a profile of German manufacture is the most suitable to
manufacturing and repair of windows.
Plastic VEKA is trudnovosplamenjajushchimsja and a material not
sustaining combustion that is confirmed by fire certificates. The tests
spent with plastic windows in extreme conditions, have shown that during
a half an hour they maintain temperature of +150 degrees on Celsius
without occurrence of cracks, bubbles and a peeling.
Firm "VEKA" profiles have passed all necessary tests; their safety is
confirmed by hygienic certificates both in Germany, and in Russia.
|
